Linux Image

From IPLOG
Revision as of 14:38, 11 May 2018 by Z013 (talk | contribs) (Created page with "IPLOG has several images/firmware that provide the low-level control for the device's specific hardware. == List of Images == '''Recovery image''' - The unit software that h...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

IPLOG has several images/firmware that provide the low-level control for the device's specific hardware.

List of Images

Recovery image - The unit software that helps you to restore or update Firmware image 1 or 2, read-only.

Firmware image 1 - Standard image.

Firmware image 2 - Standard image.


Normally, the firmware image 1 or 2 is executed. During an upgrade, the image that is not currently running is overwritten and can not be tampered with. The new image is started even after the upload was successful.

Storage

All images are stored in internal NAND memory. NAND memory has a capacity of 256 MB.

Retrieved from "http://wiki.iplog.eu/index.php?title=Linux_Image&oldid=243"